We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
Absolute Pools provides pool leak detection and pool leak repairs in Irene, Irene Village and nearby Centurion areas, helping homeowners, estates, schools, guesthouses and commercial properties find the cause of swimming pool water loss and repair it properly.
A leaking pool can waste water daily, damage paving, soften garden soil, affect the pool structure and increase pressure on the pump and filtration system. If your pool level keeps dropping, the pump keeps losing prime, or damp areas keep appearing around the pool, it is worth checking the cause before the problem becomes more expensive.
Pool leaks in Irene can come from the pool shell, underground plumbing, fittings, weir, return jets, suction lines, pool lights, pump connections, main drain, cracked surfaces or worn pool finishes. Some leaks are obvious, but many only show through a falling water level, damp soil, shifting paving or changes in the pump system.
Absolute Pools assists with leak detection for concrete pools, marbelite pools, fibreglass pools, tiled pools, older residential pools, estate pools and commercial pools in Irene and nearby Centurion areas. We check the likely leak points around the pool and look at how the water loss is behaving before recommending repair work.
The goal is to find the actual source of the leak. A pool may have visible cracks or old marbelite, but the water loss could still be coming from a fitting, pipe joint or suction line. Proper leak detection helps avoid repeated patching and unnecessary work.
A swimming pool can lose water through normal evaporation, especially during hot or windy weather. But if the water level keeps dropping quickly, or if you need to top up the pool several times a week, there may be a leak.
Common signs include damp soil near the pool, paving that stays wet, loose coping, cracks around the pool shell, a pump that struggles to prime, air bubbles coming through the return jets, weak suction, a water level that settles at the same point, stains around cracks or a sudden increase in water usage.
Pool leaks can also show through water quality problems. If the pool chemicals do not last, the water becomes cloudy after repeated top-ups, or the pool balance changes more often than usual, the pool may be losing treated water and taking in too much fresh water.
Irene has many established homes, larger garden spaces, older pool areas and landscaped properties where a leak may not show immediately on the surface. Water can move through garden soil, under paving, along retaining edges or near planted areas before it becomes visible.
In older pool areas, leaks may be connected to ageing pipework, worn marbelite, cracked concrete, loose tiles, old fittings or previous repair work that has started failing. In garden-heavy properties, roots, soil movement and long-standing moisture around the pool can make the source harder to identify without a proper inspection.
For homeowners, the concern is not only the pool water level. A hidden leak can affect paving, coping, garden beds, surrounding walls and the stability of the pool area. Early detection helps reduce unnecessary damage and gives you a clearer repair plan.
Not every water-level drop means the pool is leaking. Irene pools can lose water naturally during hot, dry or windy conditions, especially if the pool is uncovered, exposed to direct sun, heated or fitted with water features.
The concern starts when water loss becomes consistent. If the pool drops every day, loses water even in cooler conditions, or falls faster when the pump is running, the issue should be checked.
The level where the water stops dropping can also help narrow down the problem. If it settles around the weir, light, return fitting or tile line, that area may need closer inspection. If the water keeps dropping below those points, the pool shell, lower fittings or deeper plumbing may be involved. If the pool loses more water when the pump runs, the plumbing system or pressure-side fittings may be part of the issue.
Pool leaks can be caused by ageing plumbing, cracked pipe joints, worn marbelite, damaged fibreglass, structural cracks, loose tiles, failed seals, old fittings, ground movement or poor previous repairs. In older pools, more than one issue may be contributing to the water loss.
A leak can also happen around the weir, pool lights, return fittings, suction points, main drain, water features or pump-area connections. Some leaks are small but constant, which means the pool may keep losing water even though the problem looks minor from the surface.
Where the pool is surrounded by paving, lawn, trees or landscaped areas, the visible wet patch may not be directly above the leak. Water can travel through the soil before it appears in a different place.
Absolute Pools starts by looking at the water-loss pattern and the condition of the pool area. The inspection may include checking the pool shell, tile line, weir, lights, return fittings, suction points, pump connections, visible plumbing, paving edges, damp soil and areas where water may be escaping underground.
The pool system also gives important clues. If the pump pulls air, loses prime, runs noisily or has weak suction, the leak may be linked to plumbing or suction-side issues. If the pool loses water faster while the pump is running, pressure-side plumbing or return fittings may need attention.
The aim is to identify the most likely leak source before repair work begins. This helps avoid unnecessary digging, repeated patch repairs and replacing equipment that is not causing the water loss.
Once the leak has been identified, Absolute Pools can assist with the repair work needed to stop the water loss. The correct repair depends on the source of the leak, the type of pool and the condition of the pool surface or plumbing.
Some leaks can be repaired around fittings, lights, weirs, pipe connections or pump-area plumbing. Other leaks may need crack repairs, tile repairs, coping repairs, pipe repairs, resurfacing, relining or more detailed renovation work if the pool surface is badly worn.
If your pool has rough marbelite, recurring cracks, hollow areas, loose tiles, damaged fibreglass or old patch repairs, the leak may be part of a bigger surface or structural problem. In those cases, Absolute Pools can advise whether a direct repair is enough or whether resurfacing or renovation would be more reliable.
Hidden plumbing leaks can be difficult to spot because the pool may look normal while water escapes below the surface. These leaks can happen in suction lines, return lines, pipe joints, waste lines or fittings between the pool and pump system.
Signs of a possible plumbing leak include air bubbles from the return jets, weak suction, poor circulation, a pump that loses prime, damp ground near pipe routes or water loss that becomes worse when the pump is running.
In Irene homes with paved sections, garden beds, lawns or equipment areas set away from the pool, plumbing routes may not be obvious. A careful check helps narrow down whether the problem is likely to be in the pool shell, fittings or pipework.
Cracks, worn finishes and loose tiles should be checked when a pool is losing water. A visible crack does not always mean the pool is leaking, but it becomes more important when the water level is dropping at the same time.
Marbelite pools may leak when the surface becomes thin, rough, cracked or hollow. Fibreglass pools can leak around fittings, damaged areas or stressed sections. Concrete and tiled pools can leak through cracks, tile lines, failed grout, joints or poorly sealed fittings.
Absolute Pools can assess whether the pool needs a direct leak repair, crack repair, resurfacing, relining or a broader renovation. The right solution depends on whether the leak is isolated or connected to a wider pool condition problem.
Absolute Pools provides pool leak detection and pool leak repairs in Irene, Irene Village and nearby Centurion areas.
We assist clients in Southdowns, Doringkloof, Highveld, Clubview, Eldoraigne, Midstream Estate, Midfield Estate, Midlands Estate, Centurion, Lyttelton, Pierre van Ryneveld and nearby areas.
We also cover surrounding Gauteng areas, including Pretoria, Johannesburg, Sandton, Midrand, Paulshof, Sunninghill and nearby suburbs.
Pool leaks are often connected to other swimming pool repair needs. Absolute Pools also assists with swimming pool repairs, pool renovations, pool resurfacing, pool relining, marbelite repairs, fibreglass pool repairs, pump repairs, filter repairs, chlorinator repairs and swimming pool construction.
If your leak is linked to old pipework, cracked surfaces, damaged fittings, worn marbelite or failing pool equipment, we can recommend a practical repair route for your pool.
If your swimming pool is losing water, contact Absolute Pools for pool leak detection and pool leak repairs in Irene, Irene Village and surrounding Centurion areas.
We can inspect the issue, identify the likely cause of the leak and advise on the right repair for your pool.