We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
Absolute Pools provides pool leak detection and pool leak repairs in Centurion and nearby areas, helping homeowners, estates, complexes, schools and commercial properties find the cause of swimming pool water loss and repair it properly.
A leaking pool can waste water every day without looking serious at first. Over time, the leak can increase water bills, weaken soil around the pool, damage paving, affect pool finishes and place unnecessary strain on the pump and filtration system. If your pool level keeps dropping and regular top-ups have become normal, it is worth checking the cause before the damage spreads.
Swimming pool leaks in Centurion can come from the pool shell, fittings, plumbing, weir, return jets, suction lines, lights, main drain, pump connections or damaged pipework below ground. Some leaks are easy to spot, while others only show through damp paving, air in the pump system or a water level that keeps falling after being filled.
Absolute Pools assists with leak detection for residential pools, estate pools, complex pools, school pools and commercial pools across Centurion. We work with concrete pools, marbelite pools, fibreglass pools, tiled pools and older pools that may already have had resurfacing or repair work done before.
The goal is to identify where the water is escaping before repair work begins. A pool leak should not be treated with guesswork, because the visible symptom is not always the actual source of the problem.
A swimming pool can lose water through evaporation, especially during hot and windy weather, but steady water loss should not be ignored. If the level drops quickly after filling, or if you need to top up the pool several times a week, there may be a leak.
Common warning signs include damp paving, soft soil near the pool, loose coping, cracks in or around the pool shell, air bubbles returning to the pool, weak suction, the pump losing prime, a water level that settles around a fitting, or higher than normal water usage.
Some pool leaks also show through ongoing maintenance issues. If your chemicals do not last, the water keeps becoming cloudy after top-ups, or the pool balance changes more often than usual, fresh water may be entering too frequently because the pool is losing water somewhere.
Centurion has many estate homes, townhouse complexes, family properties and managed residential developments where pool leaks can cause problems beyond the pool itself. In paved pool areas, water can move under the surface before it becomes visible. In landscaped gardens, the leak may show as unusually wet soil or sinking ground near one side of the pool.
Estate and complex pools can be especially sensitive because a slow leak may affect maintenance budgets, shared water usage and resident complaints. A leak that looks minor at first can become expensive if water starts affecting paving, retaining edges, coping or nearby structures.
For family homes, the main concern is often the frustration of constant top-ups, rising water bills and uncertainty about whether the pool is safe to keep using. A proper inspection helps clarify whether the issue is a small fitting leak, an underground plumbing issue or a larger repair problem.
Not every drop in water level means the pool is leaking. Centurion pools can lose water naturally during hot, dry or windy periods, especially when the pool is uncovered, heated, exposed to full sun or has water features running.
The concern starts when water loss becomes consistent. If the pool loses water every day, drops faster when the pump is running, or falls to the same level repeatedly, the issue may be more than evaporation.
Where the water level stops can also give useful clues. If it stops near the weir, light, return fitting or tile line, that area may need closer checking. If it keeps dropping below those points, the pool shell, main drain or lower plumbing may be involved. If the level drops mostly when the pump is on, pressure-side plumbing or system connections may need attention.
Pool leaks can be caused by old pipework, cracked fittings, worn marbelite, damaged fibreglass, structural cracks, loose tiles, failed seals, movement around the pool or poor previous repairs. In older properties, ageing plumbing and tired pool surfaces can both contribute to water loss.
In newer estate properties, leaks may still happen around fittings, pipe joints, return lines, weirs, lights or areas where installation work was not sealed properly. A neat-looking pool can still have a hidden leak below the paving or behind the shell.
Centurion pools with paved surrounds, retaining walls, landscaped edges or compact estate layouts should be checked carefully because water can travel below ground and appear away from the actual leak point.
Absolute Pools starts by looking at how the pool is losing water and what symptoms are visible around the pool. The inspection may include checking the pool shell, tile line, weir, lights, return fittings, suction points, pump area, visible plumbing, paving edges and wet ground around the pool.
The behaviour of the filtration system is also important. A pump that pulls air, loses prime or runs with poor suction can point toward plumbing or suction-side issues. A pool that drops faster when the pump is running may point toward pressure-side leaks or fittings connected to the system.
The aim is to narrow down the most likely cause before repair work starts. This helps avoid unnecessary digging, repeated patching or replacing pool equipment that is not actually causing the water loss.
Once the leak has been identified, Absolute Pools can assist with the repair work needed to stop the water loss. The repair depends on the cause, the pool type and the condition of the surrounding area.
Some leaks can be repaired around fittings, lights, weirs, pipe connections or pump-area plumbing. Other leaks may need crack repairs, tile repairs, coping repairs, pipe repairs, resurfacing, relining or a more detailed renovation if the pool surface is badly worn.
If the pool has rough marbelite, recurring cracks, loose tiles, hollow areas or old patchwork repairs, a simple repair may not be the best long-term solution. In those cases, Absolute Pools can advise whether the leak is part of a wider resurfacing or renovation issue.
Hidden plumbing leaks are often harder to deal with because the pool may look normal while water escapes underground. These leaks can affect suction lines, return lines, waste lines, pipe joints or fittings between the pool and pump system.
Signs of a possible plumbing leak include air bubbles in the return jets, low suction, poor circulation, a noisy pump, damp ground near pipe routes or water loss that becomes worse when the pump is running.
In many Centurion homes and estates, pipework may run under paving, garden beds or narrow side areas. This means the wet spot you see is not always directly above the leak. The inspection needs to consider how water may be moving through the soil before it appears.
Cracks, worn surfaces and damaged finishes can allow water to escape through the pool structure. A visible crack should be checked if the pool is losing water, especially if there are stains, hollow sounds, loose tiles or rough areas nearby.
Marbelite pools may leak when the surface becomes thin, cracked or weak. Fibreglass pools can develop damage around fittings, seams or stressed areas. Concrete and tiled pools can leak through cracks, tile lines, joints or poorly sealed fittings.
Absolute Pools can assess whether the pool needs a direct leak repair, crack repair, resurfacing, relining or broader renovation work. The right solution depends on whether the leak is isolated or part of a larger surface or structural problem.
Absolute Pools assists with pool leak detection and pool leak repairs across Centurion and nearby areas.
We cover areas such as Irene, Midstream Estate, Clubview, Eldoraigne, Highveld, Doringkloof, Blue Valley Golf Estate, Lyttelton, Pierre van Ryneveld, Rooihuiskraal, Wierda Park, The Reeds, Hennopspark, Zwartkop and surrounding areas.
We also assist clients in nearby Gauteng areas, including Pretoria, Johannesburg, Sandton, Midrand, Kyalami, Paulshof, Sunninghill and nearby suburbs.
Pool leaks are often connected to other swimming pool repair needs. Absolute Pools also assists with pool repairs, pool renovations, pool resurfacing, pool relining, marbelite repairs, fibreglass pool repairs, pump repairs, filter repairs, chlorinator repairs and swimming pool construction.
If your leak is linked to damaged pipework, worn surfaces, cracked finishes, leaking fittings or old pool equipment, we can recommend a practical repair route for your pool.
If your swimming pool is losing water, contact Absolute Pools for pool leak detection and pool leak repairs in Centurion and surrounding areas.
We can inspect the issue, identify the likely cause of the leak and advise on the right repair for your pool.