We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
Absolute Pools provides pool leak detection and pool leak repairs in Lethabong and nearby Gauteng areas, helping homeowners, complexes, estates and managed properties find the cause of swimming pool water loss and repair it properly.
A leaking pool can waste water every day while the problem remains hidden under paving, soil, pipe routes or pool fittings. If your pool level keeps dropping, your pump keeps pulling air, or the ground around the pool stays damp, it is worth checking the cause before the leak affects the pool structure or surrounding areas.
Swimming pool leaks in Lethabong can come from the pool shell, underground plumbing, fittings, the weir, return lines, suction lines, pool lights, pump connections, cracked surfaces, worn marbelite, damaged fibreglass or old repair areas.
Absolute Pools assists with leak detection for residential pools, complex pools, estate pools, townhouse pools and commercial pools in Lethabong and nearby areas. We check the visible symptoms, water-loss pattern, pool surface, fittings and plumbing points that commonly cause leaks.
The aim is to find where water is escaping before repair work begins. A damp area near the pool may not be directly above the leak, and a visible crack is not always the full problem. Water can move below paving, through soil or along pipe routes before it becomes visible.
A swimming pool can lose water naturally through evaporation, especially during hot, dry or windy weather. But if the pool needs regular topping up, or if the water level drops quickly after being filled, there may be a leak.
Common signs include damp paving, wet soil around the pool, loose coping, cracks near the pool shell, air bubbles from the return jets, weak suction, a noisy pump, a pump that loses prime, a water level that settles around the same height, stains near cracks or a sudden increase in water usage.
A leak can also affect the pool’s water quality. If chlorine does not last, the water balance keeps changing, or the pool becomes cloudy after repeated top-ups, the pool may be losing treated water and being refilled too often.
Lethabong and nearby areas include a mix of residential homes, estates, townhouse complexes and managed properties where pools are often close to paved entertainment areas, boundary walls, garden beds, walkways or compact outdoor spaces.
In these settings, a pool leak can cause damage before the source is obvious. Water may soften the soil below paving, move along garden edges, collect near walls or appear as a damp patch away from the actual leak point.
For homeowners, this can lead to constant top-ups, wasted chemicals and concern about the pool area becoming unstable. For complexes and managed properties, the problem can affect maintenance budgets, shared spaces, resident complaints and the appearance of the property.
Not every drop in pool level means the pool is leaking. Pools in Lethabong and nearby areas can lose water naturally during warm weather, especially if they are uncovered, exposed to wind, heated, fitted with water features or positioned in direct sun.
The concern starts when the water loss is consistent. If the pool drops every day, loses water faster when the pump runs, or settles around the same point after each top-up, the issue should be checked.
The level where the water stops dropping can help narrow down the problem. If it settles near the weir, return fitting, pool light or tile line, that area may need closer inspection. If the water keeps dropping below those points, the pool shell, lower fittings, main drain or deeper plumbing may be involved. If the loss is worse while the pump is running, pressure-side plumbing or return lines may be part of the issue.
Pool leaks can be caused by cracked pipe joints, old plumbing, worn marbelite, damaged fibreglass, cracked concrete, loose tiles, failed seals, leaking fittings, ground movement or previous repairs that no longer hold.
A leak can also happen around the weir, pool lights, suction points, return fittings, main drain, water features, pump connections or pipework between the pool and filtration system. Some leaks are small but constant, which means the pool can lose a large amount of water over time even when the problem does not look serious.
In properties with paved surrounds or landscaped pool areas, water can travel below the surface before appearing. This is why the pool shell, fittings and plumbing system should all be considered during leak detection.
Absolute Pools starts by looking at how the pool is losing water and where the symptoms are appearing. The inspection may include checking the pool shell, tile line, weir, pool lights, return fittings, suction points, pump area, visible pipework, paving edges, garden soil and any damp areas around the pool.
The pump and filtration system can also give useful clues. A pump that pulls air, loses prime, runs noisily or has weak suction may point toward suction-side plumbing or pipework issues. A pool that loses water faster when the system is running may point toward return lines, pressure-side plumbing or pump-area leaks.
The goal is to narrow down the most likely source before repair work starts. This helps avoid unnecessary digging, random patching and replacing pool equipment that is not responsible for the leak.
Once the leak has been identified, Absolute Pools can assist with the repair work needed to stop the water loss. The correct repair depends on the source of the leak, the pool type and the condition of the pool surface, pipework or surrounding area.
Some leaks can be repaired around fittings, pool lights, weirs, pipe joints or pump-area plumbing. Other leaks may need crack repairs, tile repairs, coping repairs, pipe repairs, resurfacing, relining or more detailed renovation work if the pool surface is badly worn.
If the pool has rough marbelite, recurring cracks, hollow areas, loose tiles, damaged fibreglass or old patch repairs, a simple patch may not be the best long-term solution. Absolute Pools can advise whether the leak is isolated or connected to a wider resurfacing or renovation problem.
Hidden plumbing leaks can be difficult to notice because the pool may still look normal while water escapes underground. These leaks can happen in suction lines, return lines, waste lines, pipe joints or fittings between the pool and pump system.
Signs of a possible plumbing leak include air bubbles from the return jets, low suction, poor circulation, a pump that struggles to prime, damp soil near pipe routes or water loss that becomes worse when the pump is running.
In Lethabong properties, pipework may run below paving, through garden areas, along boundary walls or behind entertainment spaces. The wet area you notice may not show the exact leak point because water can move through the soil before appearing on the surface.
Cracks, loose tiles, hollow areas and worn finishes should be checked when a pool is losing water. A visible crack does not always mean the pool is leaking, but it becomes more important when water loss is happening at the same time.
Marbelite pools may leak when the surface becomes thin, rough, cracked or hollow. Fibreglass pools can leak around fittings, stressed areas or damaged sections. Concrete and tiled pools can leak through cracks, tile lines, weak joints, failed grout or poorly sealed fittings.
Absolute Pools can assess whether the pool needs a direct leak repair, crack repair, resurfacing, relining or a more complete pool renovation. The right repair depends on whether the leak is isolated or part of a larger pool condition issue.
Absolute Pools provides pool leak detection and pool leak repairs in Lethabong and nearby Gauteng areas.
We assist clients in Edenvale, Modderfontein, Greenstone Hill, Lombardy East, Linbro Park, Longmeadow, Sebenza, Kelvin, Marlboro, Sandton, Midrand and surrounding areas.
We also cover wider Gauteng areas, including Johannesburg, Randburg, Centurion, Pretoria, Paulshof, Sunninghill and nearby suburbs.
Pool leaks are often connected to other swimming pool repair needs. Absolute Pools also assists with swimming pool repairs, pool renovations, pool resurfacing, pool relining, marbelite repairs, fibreglass pool repairs, pump repairs, filter repairs, chlorinator repairs and swimming pool construction.
If your leak is linked to old plumbing, cracked surfaces, damaged fittings, worn marbelite or failing pool equipment, we can recommend a practical repair route for your pool.
If your swimming pool is losing water, contact Absolute Pools for pool leak detection and pool leak repairs in Lethabong and surrounding Gauteng areas.
We can inspect the issue, identify the likely cause of the leak and advise on the right repair for your pool.