We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
Absolute Pools provides pool resurfacing, pool relining and re-marbelite services in Pretoria and nearby Gauteng areas for swimming pools with rough, stained, cracked, leaking or worn surfaces.
If your pool surface has become uncomfortable, difficult to clean or visibly tired, resurfacing can help restore the pool without rebuilding it from scratch. A renewed surface can improve the appearance of the pool, make it easier to maintain and help protect the structure when the existing finish has started failing.
Pool resurfacing is needed when the interior finish of the swimming pool has worn down and can no longer perform properly. In Pretoria homes, this is common with older marbelite pools, concrete pools, plastered pools and fibreglass pools that have been exposed to years of use, cleaning, weather, chemical changes and previous repairs.
The surface may become rough, thin, stained, patchy, cracked, hollow or uncomfortable underfoot. In some cases, the pool may also start losing water because the surface, fittings, tile line or cracks are no longer sealing properly.
Absolute Pools assesses the pool surface and recommends the right repair route. Depending on the pool type and condition, this may involve re-marbelite, relining, fibreglass repair, crack repair, surface preparation, fitting repairs or broader pool renovation work.
A swimming pool does not need resurfacing simply because it looks a little old. The concern starts when the surface begins affecting the comfort, cleanliness, appearance or structure of the pool.
You may need resurfacing if the pool surface feels rough underfoot, scratches swimmers, collects algae easily, has stubborn stains, shows cracks, has hollow areas, has loose tiles, keeps losing water or has worn marbelite that no longer responds properly to cleaning.
Another sign is when the pool always looks dull or dirty even after cleaning. When a surface becomes porous or uneven, dirt and algae can settle more easily. The water may still be chemically treated, but the pool can continue looking older because the finish itself has deteriorated.
Re-marbelite is a common resurfacing option for many concrete pools in Pretoria. It is used when the existing marbelite has become rough, stained, thin, cracked, patchy or uncomfortable.
A new marbelite finish can restore the interior surface of the pool and give it a cleaner, more usable appearance. It can also help renew the waterproofing function of the pool when the preparation and application are done correctly.
Before re-marbelite work begins, the condition of the existing surface should be checked. If there are cracks, leaks, hollow sections or damaged fittings, those issues should be addressed as part of the process. Applying a new finish over a weak or leaking base can cause problems to return later.
Pool relining is another way to renew a damaged or worn swimming pool surface. It may be suitable when the current finish is no longer sealing properly, when the pool needs a new protective layer, or when the surface has become too damaged for basic patching.
Relining should be planned carefully. If the pool is leaking, the leak should be investigated before the new lining is installed. Water loss may be coming from the surface, but it may also be linked to pool lights, return fittings, suction lines, the weir, the main drain, underground pipework or pump connections.
Absolute Pools can inspect the pool and advise whether relining, re-marbelite, fibreglass repair or a broader renovation is the better option for the condition of your pool.
A rough pool surface is one of the clearest signs that resurfacing may be needed. Rough marbelite can scratch feet, damage swimwear and make the pool less comfortable to use.
In many Pretoria homes, the pool may have been built years ago and repaired in sections over time. The steps may feel rough, the shallow end may look worn, the corners may collect dirt and the colour may look uneven across the pool. These are signs that the surface is ageing rather than simply needing another clean.
If the surface has become rough across large sections of the pool, resurfacing is usually more practical than repeated patch repairs. A proper resurfacing job deals with the pool interior as a whole instead of trying to hide small areas of damage one at a time.
Pool stains can come from many causes, including leaves, metals, algae, chemical imbalance and old surface damage. Some stains can be treated, but others become difficult to remove when the pool surface itself has become porous or worn.
A faded or patchy pool can make the entire outdoor area look neglected, even if the water is clear. This is especially noticeable in Pretoria properties where the pool sits close to patios, entertainment areas, landscaped gardens or guest areas.
When stains keep returning, or when the surface has absorbed marks that normal cleaning cannot remove, resurfacing may be a better long-term solution than repeated acid washing or temporary treatments.
A cracked pool surface should be checked before resurfacing work is planned. Some cracks are cosmetic, while others may allow water to escape or point to movement in the pool shell.
If the pool is losing water, the source of the leak should be understood first. Water loss may come from the pool surface, but it can also come from fittings, lights, weirs, pipework, pump connections or underground plumbing.
Absolute Pools can assist with pool leak detection, crack repairs and resurfacing where needed. If the leak is linked to the surface, resurfacing may form part of the repair. If the leak is in the plumbing or fittings, those repairs should be handled before the new surface is completed.
Pretoria has many established suburbs with older homes, renovated properties, guesthouses and family pools that have been used for many years. In areas like Waterkloof, Brooklyn, Groenkloof, Monument Park, Lynnwood, Garsfontein and Moreleta Park, pool surfaces may have gone through several rounds of repair, patching or cosmetic updates.
An older pool can often be restored without a full rebuild, but the right resurfacing method depends on what is underneath the visible wear. A pool with old marbelite, cracked steps, damaged tiles and leaking fittings may need more preparation than a pool that only has a worn surface.
A proper assessment helps decide whether the pool needs straightforward resurfacing or whether related renovation work should be done at the same time.
Different pool types need different resurfacing methods. Concrete and gunite pools may be suitable for re-marbelite, plaster repair, crack repair or full resurfacing. Fibreglass pools may need fibreglass repair, relining, surface restoration or fitting repairs. Tiled pools may need tile repair, grout work, waterproofing checks or structural repairs before resurfacing.
The best option depends on the pool’s material, age, condition and the reason the surface failed. A rough marbelite pool is not repaired in the same way as a damaged fibreglass pool. A stained concrete pool may need a different approach from a leaking tiled pool.
Absolute Pools can inspect the surface and recommend a practical repair route for the type of pool you have.
Good pool resurfacing depends heavily on preparation. A new finish should not be applied over loose, dirty, hollow, cracked or unstable material.
Preparation may include draining the pool, cleaning the surface, removing loose material, opening and repairing cracks, checking fittings, preparing edges, repairing damaged sections and making sure the new surface has a stable base.
If the old surface has failed in several places, more preparation may be needed. This step is important because poor preparation can lead to peeling, cracking, hollow sections or early surface failure after the pool has been resurfaced.
Absolute Pools provides pool resurfacing, pool relining and re-marbelite services in Pretoria and nearby areas.
We assist clients in Pretoria East, Waterkloof, Brooklyn, Groenkloof, Monument Park, Lynnwood, Garsfontein, Moreleta Park, Faerie Glen, Olympus, Equestria, Silver Lakes, Mooikloof, Woodhill, Hatfield, Irene and surrounding areas.
We also provide pool resurfacing and related repair services in Centurion, Midrand, Sandton, Randburg, Johannesburg, Edenvale and nearby Gauteng areas.
Pool resurfacing is often connected to other pool repair needs. Absolute Pools also assists with pool leak detection, pool leak repairs, pool renovations, marbelite repairs, fibreglass pool repairs, pump repairs, filter repairs, chlorinator repairs, paving-related pool repairs and swimming pool construction.
If your pool surface is failing because of leaks, cracks, old plumbing, damaged fittings or poor circulation, we can help identify those issues before resurfacing work begins.
If your swimming pool surface is rough, stained, cracked, leaking or worn out, contact Absolute Pools for pool resurfacing, pool relining and re-marbelite services in Pretoria and surrounding Gauteng areas.
We can assess the condition of your pool, explain the best resurfacing option and help restore the pool so it looks better, feels better and is easier to maintain.