We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
Absolute Pools provides pool leak detection and pool leak repairs in Morningside and nearby Sandton areas, helping homeowners, complexes, estates and managed properties find the cause of swimming pool water loss and repair it properly.
A leaking pool can be frustrating because the pool may still look clean and usable while water is escaping below the surface. The first signs are often small: a water level that keeps dropping, paving that stays damp, a pump that pulls air, or a pool that needs to be topped up more often than usual. If the leak is not checked early, it can lead to water waste, paving damage, soil movement, chemical loss and more expensive repair work.
Swimming pool leaks in Morningside can come from the pool shell, plumbing, fittings, weir, return jets, suction lines, pool lights, pump connections, old marbelite, cracked surfaces or previous repair work. Some leaks are visible, but many are hidden below paving, behind the pool shell or in the pipework between the pool and pump system.
Absolute Pools assists with leak detection for residential pools, townhouse pools, complex pools, estate pools and commercial pools in Morningside and surrounding Sandton areas. We check the likely leak points around the pool and look at how the water loss is behaving before recommending repair work.
The aim is to identify the cause of the leak instead of guessing. A pool may show damp paving on one side, but the actual leak may be coming from a fitting, underground pipe or plumbing connection. A visible crack may also be only part of the problem, especially in older or renovated pools.
A swimming pool can lose some water naturally through evaporation, especially during hot, dry or windy weather. But if the level keeps dropping quickly after being filled, or if topping up the pool has become part of your weekly routine, the water loss should be checked.
Common signs of a leaking pool include damp paving, wet soil near the pool area, loose coping, cracks around the pool shell, air bubbles coming through the return jets, weak suction, a pump that loses prime, a water level that settles around the same point, stains near cracks or an unexpected increase in water usage.
A leak can also affect pool maintenance. If the water balance keeps changing, chlorine does not last, or the pool becomes cloudy after repeated top-ups, the pool may be losing treated water and replacing it with fresh water too often.
Morningside has many upmarket homes, cluster developments, townhouse complexes and renovated properties where the pool area is often part of the main entertainment space. Pools may be close to patios, paving, outdoor seating, garden beds, boundary walls or built-in features.
This can make leaks harder to spot. Water may travel below paving before appearing somewhere else, or it may soak into landscaped areas without leaving an obvious puddle. In complexes and managed properties, a small leak can also become a maintenance issue if it affects shared spaces, walkways, paving or resident complaints.
For private homes, the concern is often the cost and inconvenience of constant top-ups, chemical loss and possible damage around the pool. For managed properties, early leak detection helps reduce unnecessary water usage and avoids repeated short-term fixes that do not solve the actual cause.
Not every drop in water level means the pool is leaking. Morningside pools can lose water naturally during warm weather, especially if they are uncovered, exposed to direct sun, heated, affected by wind or fitted with water features.
The concern starts when the water loss is consistent. If the pool drops every day, loses water faster when the pump is running, or settles around the same level after each top-up, there may be a leak.
The level where the water stops dropping can give useful clues. If it stops around the weir, return jet, pool light or tile line, that area may need closer checking. If the level continues dropping below those points, the shell, lower fittings or deeper plumbing may be involved. If water loss is worse when the system runs, the leak may be linked to pressure-side plumbing, return lines or pump-area connections.
Pool leaks can be caused by worn marbelite, cracked concrete, damaged fibreglass, loose tiles, failed seals, old plumbing, leaking fittings, damaged lights, pipe movement, ground movement or poor previous repairs.
In renovated homes, leaks may be connected to older pool structures that were resurfaced or updated without fully addressing underlying pipework or shell issues. A pool can look modern from the surface while older plumbing, fittings or weak areas continue causing water loss.
In paved pool areas, water may escape below the surface and affect the surrounding paving before the leak is obvious. Around gardens or narrow side areas, water can move through the soil and appear away from the actual leak point. This is why both the pool structure and the plumbing system should be considered during the inspection.
Absolute Pools starts by looking at the water-loss pattern, the visible condition of the pool and the areas around it. The inspection may include checking the pool shell, tile line, weir, lights, return fittings, suction points, pump area, visible pipework, paving edges and any damp or soft ground around the pool.
The pump and filtration system can also give important clues. A pump that pulls air, loses prime, runs noisily or has weak suction may point toward a plumbing issue. A pool that loses water faster when the system is running may point toward return lines, fittings or pressure-side leaks.
The goal is to narrow down the likely source before repair work starts. This helps avoid unnecessary digging, random patching and replacing pool equipment that is not responsible for the water loss.
Once the leak has been identified, Absolute Pools can assist with the repair work needed to stop the water loss. The right repair depends on where the leak is coming from and the condition of the pool.
Some leaks can be repaired around fittings, pool lights, weirs, pipe connections or pump-area plumbing. Other leaks may require crack repairs, tile repairs, coping repairs, pipe repairs, resurfacing, relining or broader renovation work if the pool surface has started failing.
If your pool has rough marbelite, recurring cracks, hollow areas, loose tiles, damaged fibreglass or old patch repairs, a quick repair may not be enough. In those cases, Absolute Pools can advise whether the leak is isolated or part of a bigger resurfacing or renovation issue.
Hidden plumbing leaks can be difficult to identify because the pool may look normal while water escapes underground. These leaks can happen in suction lines, return lines, waste lines, pipe joints or fittings between the pool and pump.
Signs of a possible plumbing leak include air bubbles in the return jets, low suction, poor circulation, a pump that loses prime, damp ground near pipe routes or water loss that becomes worse while the pump is running.
In Morningside properties, pipework may run under paving, along walls, behind landscaping or through narrow service areas. The visible damp patch is not always directly above the leak, so the inspection needs to consider how water may be moving below the surface.
Cracks, loose tiles, worn surfaces and damaged finishes should be checked when a pool is losing water. A visible crack does not always mean the pool is leaking, but it becomes more important when water loss is happening at the same time.
Marbelite pools may leak when the surface becomes thin, rough, cracked or hollow. Fibreglass pools can leak around fittings or damaged sections. Concrete and tiled pools can leak through cracks, weak joints, tile lines, failed grout or poorly sealed fittings.
Absolute Pools can assess whether the pool needs a direct leak repair, crack repair, resurfacing, relining or a more complete pool renovation. The best solution depends on whether the leak is isolated or linked to the wider condition of the pool.
Absolute Pools provides pool leak detection and pool leak repairs in Morningside and nearby Sandton areas.
We assist clients in Sandton, Morningside Manor, Rivonia, Bryanston, Woodmead, Sunninghill, Paulshof, Gallo Manor, Edenburg, Benmore Gardens, Sandown, Hyde Park and surrounding areas.
We also cover wider Gauteng areas, including Johannesburg, Midrand, Centurion, Pretoria and nearby suburbs.
Pool leaks are often connected to other swimming pool repair needs. Absolute Pools also assists with swimming pool repairs, pool renovations, pool resurfacing, pool relining, marbelite repairs, fibreglass pool repairs, pump repairs, filter repairs, chlorinator repairs and swimming pool construction.
If your leak is linked to old pipework, cracked surfaces, damaged fittings, worn marbelite or failing pool equipment, we can recommend a practical repair route for your pool.
If your swimming pool is losing water, contact Absolute Pools for pool leak detection and pool leak repairs in Morningside and surrounding Sandton areas.
We can inspect the issue, identify the likely cause of the leak and advise on the right repair for your pool.