We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
Absolute Pools provides pool leak detection and pool leak repairs in Midrand and nearby areas, helping homeowners, estates, complexes, schools and commercial properties find the cause of swimming pool water loss and repair it properly.
A leaking pool can waste water every day while the actual problem stays hidden below paving, inside pipework, around fittings or behind the pool shell. If your pool level keeps dropping, the pump keeps pulling air, or damp areas keep appearing around the pool, the leak should be checked before it affects the pool structure, paving or surrounding soil.
Swimming pool leaks in Midrand can come from the pool shell, underground plumbing, weir, return jets, suction lines, pool lights, main drain, pump connections, cracked surfaces, worn marbelite, damaged fibreglass or old repair areas.
Absolute Pools assists with leak detection for residential pools, estate pools, complex pools, townhouse pools, school pools and commercial pools across Midrand. We look at how the pool is losing water, where the symptoms are appearing, how the pump system is behaving and which leak points are most likely to be involved.
Midrand has a wide mix of pool types, from older family pools in established properties to newer estate-style pools, complex pools and pools built close to paved entertainment areas. This means leak detection must consider both the visible pool structure and the hidden plumbing around it.
A swimming pool can lose some water naturally through evaporation, especially during hot, dry or windy weather. But if the pool needs regular topping up, or if the water level drops quickly after being filled, there may be a leak.
Common warning signs include damp paving, wet soil near the pool, soft ground around landscaped areas, loose coping, cracks near the pool shell, air bubbles from the return jets, weak suction, a noisy pump, a pump that loses prime, stains near cracks or a water level that keeps settling around the same point.
A leak can also show through ongoing maintenance issues. If chlorine does not last, the water balance keeps changing, or the pool becomes cloudy after repeated top-ups, the pool may be losing treated water and being refilled too often with fresh water.
Midrand includes areas with freestanding homes, estates, townhouse complexes, sectional-title developments, schools, lodges and commercial properties. In many of these properties, pools are close to paving, patios, boundary walls, garden beds, lawns or entertainment spaces.
When water escapes below ground, it can travel before it becomes visible. A damp patch near a wall, a soft area in the garden or paving that starts shifting may not be directly above the leak. The water may be moving along pipe routes, under paving or through compacted soil before appearing on the surface.
For homeowners, a hidden leak can lead to rising water bills, wasted chemicals, pool equipment problems and damage around the pool area. For estates, complexes and commercial properties, leak detection helps reduce repeated maintenance complaints and avoids temporary fixes that do not solve the actual cause.
Not every water-level drop means the pool is leaking. Midrand pools can lose water naturally when they are uncovered, exposed to sun, affected by wind, heated or fitted with water features.
The concern starts when water loss becomes consistent. If the pool drops every day, loses water faster when the pump is running, or returns to the same low level after every top-up, the issue should be checked.
The water level can also give useful clues. If it settles near the weir, pool light, return fitting or tile line, that area may need closer attention. If the water continues dropping below those points, the pool shell, lower fittings, main drain or deeper plumbing may be involved. If the loss becomes worse while the pump runs, pressure-side plumbing, return lines or pump-area fittings may be part of the problem.
Pool leaks can be caused by cracked pipe joints, old plumbing, failed seals, worn marbelite, damaged fibreglass, cracked concrete, loose tiles, leaking fittings, soil movement or previous repairs that no longer hold.
In newer properties, a leak may come from fittings, pipe joins, plumbing routes, water features or pool lights that were not sealed correctly or have shifted over time. In older properties, the issue may be linked to aged pipework, rough marbelite, recurring cracks, weakened surfaces or repair work that has started failing.
Leaks can also happen around weirs, suction points, return jets, main drains, overflow points, pump connections and pipework between the pool and filtration system. Even a small leak can waste a lot of water if the pool is repeatedly topped up instead of repaired.
Absolute Pools starts by looking at the water-loss pattern and the visible condition of the pool area. The inspection may include checking the pool shell, tile line, weir, pool lights, return fittings, suction points, pump area, visible pipework, paving edges, garden soil and damp sections around the pool.
The pump and filtration system can also help narrow down the likely source. A pump that pulls air, loses prime, runs noisily or has weak suction may point toward suction-side plumbing or pipework problems. A pool that loses water faster while the system is running may point toward return lines, pressure-side plumbing or pump-area leaks.
The aim is to identify the most likely leak source before repair work starts. This helps reduce unnecessary digging, repeated patching and replacing pool equipment that is not responsible for the water loss.
Once the leak has been identified, Absolute Pools can assist with the repair work needed to stop the water loss. The correct repair depends on where the leak is coming from, the type of pool and the condition of the surface, fittings, pipework or surrounding area.
Some leaks can be repaired around fittings, pool lights, weirs, pipe joints or pump-area plumbing. Other leaks may require crack repairs, tile repairs, coping repairs, pipe repairs, resurfacing, relining or broader renovation work if the pool surface is badly worn.
If the pool has rough marbelite, recurring cracks, hollow areas, loose tiles, damaged fibreglass or old patch repairs, a quick repair may not be the best long-term solution. Absolute Pools can advise whether the leak is isolated or whether resurfacing, relining or more detailed renovation work would be more reliable.
Hidden plumbing leaks can be difficult to identify because the pool may still look clean while water escapes underground. These leaks can happen in suction lines, return lines, waste lines, pipe joints or fittings between the pool and pump system.
Signs of a possible plumbing leak include air bubbles from the return jets, weak suction, poor circulation, a pump that struggles to prime, damp ground near pipe routes or water loss that becomes worse when the pump is running.
In Midrand properties, pipework may run below paving, through lawns, along boundary walls, behind entertainment spaces, under garden beds or through narrow service areas. The damp area you notice may not show the exact leak point because water can move underground before appearing on the surface.
Cracks, loose tiles, hollow areas and worn pool finishes should be checked when a pool is losing water. A visible crack does not always mean the pool is leaking, but it becomes more important when water loss is happening at the same time.
Marbelite pools may leak when the surface becomes thin, rough, cracked or hollow. Fibreglass pools can leak around fittings, stressed sections or damaged areas. Concrete and tiled pools can leak through cracks, tile lines, weak joints, failed grout or poorly sealed fittings.
Absolute Pools can assess whether the pool needs a direct leak repair, crack repair, resurfacing, relining or a more complete pool renovation. The best repair depends on whether the leak is isolated or connected to the wider condition of the pool.
Absolute Pools provides pool leak detection and pool leak repairs in Midrand and nearby areas.
We assist clients in Blue Hills, Kyalami, Carlswald, Noordwyk, Waterfall, Vorna Valley, Halfway Gardens, Barbeque Downs, Crowthorne, Glen Austin, Beaulieu, Randjesfontein, President Park and surrounding areas.
We also cover wider Gauteng areas, including Johannesburg, Sandton, Paulshof, Sunninghill, Centurion, Irene, Midstream Estate, Pretoria, Randburg and nearby suburbs.
Pool leaks are often connected to other swimming pool repair needs. Absolute Pools also assists with swimming pool repairs, pool renovations, pool resurfacing, pool relining, marbelite repairs, fibreglass pool repairs, pump repairs, filter repairs, chlorinator repairs and swimming pool construction.
If your leak is linked to old plumbing, damaged fittings, cracked surfaces, worn marbelite or failing pool equipment, we can recommend a practical repair route for your pool.
If your swimming pool is losing water, contact Absolute Pools for pool leak detection and pool leak repairs in Midrand and surrounding areas.
We can inspect the issue, identify the likely cause of the leak and advise on the right repair for your pool.