We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
We provide specialized winterization services to safeguard your pool during the off-season, and when spring arrives, we handle the thorough opening process.
Absolute Pools provides pool leak detection and pool leak repairs in Eldoraigne and nearby Centurion areas, helping homeowners, complexes, estates and managed properties find the cause of swimming pool water loss and repair it properly.
A leaking pool in an established residential area can be difficult to ignore for long. The pool may need constant topping up, paving may stay damp, the pump may start pulling air, or the water level may keep dropping to the same point. If the cause is not checked early, the leak can waste water, damage the surrounding pool area and turn a manageable repair into a bigger problem.
Swimming pool leaks in Eldoraigne can come from old pipework, loose fittings, worn marbelite, cracked concrete, damaged fibreglass, pool lights, the weir, return lines, suction lines, pump connections or previous repairs that have started failing.
Absolute Pools checks the pool, pump system and surrounding area to understand where the water may be escaping. The inspection may include the pool shell, tile line, coping, fittings, lights, weir, pump area, visible pipework, paving edges, damp soil and sections where water may be moving underground.
Many Eldoraigne pools are in family homes with established gardens, paved pool surrounds and older pool systems. In these settings, the leak is not always directly under the wet patch. Water can move through soil, under paving or along pipe routes before it becomes visible.
Eldoraigne has many long-standing residential properties where pools may have been resurfaced, repaired, retiled or altered over time. The pool may look usable from the surface, but older plumbing, worn fittings or ageing finishes can still cause water loss.
In older pools, more than one issue may be present. A worn marbelite surface may show cracks or hollow areas, while old pipe joints or fittings may also be weak. A pump that struggles to prime may point to plumbing, while a water level that settles at a specific height may point to a fitting, light, weir or tile line.
A proper leak check helps separate these issues before repair work begins, so the solution is based on the cause and not only the most visible symptom.
A swimming pool can lose some water through evaporation, especially during hot, dry or windy weather. But regular top-ups should not become normal if the pool keeps dropping quickly.
Possible signs of a pool leak include damp paving around the pool, soft soil near garden beds, loose coping, cracks in the pool surface, air bubbles from the return jets, weak suction, a noisy pump, a pump that loses prime, stains near cracks, or a water level that returns to the same low point after being filled.
The pool water may also become harder to manage. If chlorine does not last, the water keeps turning cloudy, or the balance changes after repeated top-ups, treated water may be escaping and being replaced too often with fresh water.
In Eldoraigne homes, pool areas are often surrounded by paving, lawns, garden beds, patios or boundary walls. When water escapes below ground, it can soften soil and affect surrounding finishes before the leak source becomes obvious.
A damp patch beside the pool may be caused by a leak in a pipe route, a fitting, a crack, a pool light or a weak section of the shell. It may not be coming from the area directly below the wet spot. This is why it is important to check the pool and the system around it before opening paving or doing repair work.
Early leak detection can help protect paving, coping, garden areas and the pool structure from ongoing water movement.
Not every drop in the water level means there is a leak. Pools can lose water naturally during hot weather, especially when they are uncovered, exposed to wind, heated or fitted with water features.
A leak becomes more likely when the water loss is consistent. If the level drops every day, falls faster when the pump is running, or stops at the same level after each top-up, the cause should be checked.
If the water stops near the weir, return fitting, pool light or tile line, that section may need closer inspection. If it continues dropping below those points, the pool shell, lower fittings, main drain or deeper plumbing may be involved. If the pool loses more water while the pump runs, the issue may be connected to pressure-side plumbing, return lines or pump-area connections.
Pool leaks can be caused by ageing pipework, cracked pipe joints, failed seals, damaged fittings, worn marbelite, cracked concrete, loose tiles, damaged fibreglass, weak grout lines, soil movement or old repairs that no longer hold.
Leaks can also happen around the weir, pool lights, suction points, return jets, main drain, water features, overflow points and pump connections. Even a small leak can waste a large amount of water if the pool is topped up repeatedly without repairing the cause.
In established Centurion properties, older pool systems often need careful checking because surface problems and plumbing problems can appear at the same time. The repair should match the actual cause of the water loss.
A pool can lose water even when the shell and surface look normal. Underground plumbing leaks can happen in suction lines, return lines, waste lines, pipe joints or fittings between the pool and pump system.
A plumbing leak may show through air bubbles in the return jets, poor circulation, weak suction, a pump that struggles to prime or water loss that becomes worse while the system is running.
In properties where the pump is positioned away from the pool or pipework runs below paving and garden areas, the leak route may not be obvious from the surface. Checking the system behaviour helps identify whether the problem is likely to be plumbing-related.
Pool surfaces should be checked carefully when there is ongoing water loss. Marbelite pools may leak when the surface becomes thin, rough, cracked or hollow. Fibreglass pools can leak around fittings, damaged areas or stressed sections. Concrete and tiled pools can leak through cracks, tile lines, weak joints, failed grout or poorly sealed fittings.
A visible crack should be taken seriously when the pool is losing water, but it is not always the only issue. The pool may also have leaking pipework, loose fittings or old seals that need attention.
Absolute Pools can assess whether the pool needs a direct leak repair, crack repair, pipe repair, resurfacing, relining or a more complete renovation.
Once the likely source of the leak has been identified, Absolute Pools can assist with the repair work needed to stop the water loss.
Some leaks can be repaired around fittings, pool lights, weirs, pipe joints or pump-area plumbing. Other leaks may need crack repairs, tile repairs, coping repairs, pipe repairs, resurfacing or relining if the pool surface is worn or damaged.
If the pool has rough marbelite, recurring cracks, hollow areas, loose tiles, damaged fibreglass or old patchwork, a quick patch may not be enough. A more reliable repair may involve resurfacing, relining or a broader pool repair plan, depending on the condition of the pool.
Repeatedly topping up a leaking pool can hide the problem for a while, but it does not stop the damage. It can also make pool care more expensive because chemicals are constantly diluted and the pump system may work harder than it should.
Short-term patching can also become costly if the leak is not where it first appears. A wet area may be caused by underground water movement, not the exact leak point. A pump issue may point to plumbing rather than the pool shell.
Finding the likely cause first helps reduce unnecessary work and gives you a clearer repair route.
Absolute Pools provides pool leak detection and pool leak repairs in Eldoraigne and nearby Centurion areas.
We assist clients in Clubview, Wierda Park, Zwartkop, Hennopspark, Doringkloof, Lyttelton, Highveld, Rooihuiskraal, Valhalla, Amberfield, The Reeds and surrounding areas.
We also cover wider Gauteng areas, including Centurion, Irene, Midstream Estate, Pretoria, Johannesburg, Sandton, Midrand, Randburg and nearby suburbs.
Pool leaks are often connected to other swimming pool repair needs. Absolute Pools also assists with swimming pool repairs, pool renovations, pool resurfacing, pool relining, marbelite repairs, fibreglass pool repairs, pump repairs, filter repairs, chlorinator repairs and swimming pool construction.
If your leak is linked to old plumbing, cracked surfaces, damaged fittings, worn marbelite or failing pool equipment, we can recommend a practical repair route for your pool.
If your swimming pool is losing water, contact Absolute Pools for pool leak detection and pool leak repairs in Eldoraigne and surrounding Centurion areas.
We can inspect the issue, identify the likely cause of the leak and advise on the right repair for your pool.